16GB Computer memory DDR3 for Fujitsu Primergy TX300 S6 RAM RDIMM

Memory for server Fujitsu Primergy TX300 S6

Information on memory configuration

The following technical specifications should be considered in advance:

• The device supports ECC DIMM (with error correction code) or RDIMM (Registered DIMM) RAM memories. RDIMM memories are recommended when large memory capacities are to be achieved.
• The different memory technologies (ECC / RDIMM) may not be mixed.
• If a memory expansion is to be made with the already existing RAM memories, it must be checked which memory technology (ECC/ RDIMM) is already installed in the system.
• A higher memory clock of the memory module automatically adapts to the memory clock specified by the system. This can be the case especially with larger capacities.
• Memory slots without a processor may not be used.

Principles of memory assembly

• The memory slots are organised in groups of 3.
• Only max. 2 slots per group of 3 can be used for UDIMM ECC memory.
• Only a maximum of 2 slots per group of 3 can be equipped with 4Rank RDIMM memory.
• The different groups of 3 slots do not have to have the same capacities.

Memory configuration for good system performance

• Distribute the memory evenly among the memory slots and equally among the CPUs.
• Bei jeweils 3 gleichen memoryn pro 3er Steckplatzgruppe, ist die Performance until zum 3fachen schneller im Vergleich einer Bestückung der 3er Steckplatzgruppe with nur einem memory.
• If there is more than one CPU, the RAM per CPU should be populated identically (mirrored to the other CPU).

Do you have any questions concerning this product?