Skip to main content Skip to search Skip to main navigation

8GB Computer memory DDR3 for HP Z600 RAM UDIMM ECC

Memory for workstation HP Z600

The workstation-RAM memory expands the memory capacity of HP Z600 by 8GB. The offered memory is a DDR3 RAM memory. Further technical memory specifications can be found in the list on the right. Be sure, to upgrade your system with 100% compatible Computer memory from the RAM specialist.

Note when selecting the memory modules

RDIMM memory can only be used starting from motherboard revision C2 (Intel 5520 chipset).

Here's how to check if you have a motherboard with a C2 revision:

- Start the BIOS setup menu. In the System Information Menu the Boot Block Date is displayed

- If the Boot Block Date shows the date 01/07/10, it is a C2 revision

- If the Boot Block Date shows the date 01/30/09, it is a B3-based system


Alternatively, you can use the HP Performance Advisor software. Here you can find the information under System Configuration and Baseboard ID.

- All B3-based systems have the value: 0AE8h

- The system with the C2 revision has the value: 0B54h


RDIMM and ECC UDIMM must not be used together.

Do you have any questions concerning this product?

Computer memory - info

Memory size 8GB
Memory technology DDR3
Memory speed 1333MHz
JEDEC standard PC3-10600E
Rank 2Rx8
Type UDIMM ECC (ECC unbuffered)
Number of Pin 240 Pin DIMM
Voltage 1,5 volt
Specials -

Device - Specifications

Device manufacturer HP
Device type Workstation
Device family HP workstation
Device series workstation Z600 series
Device name Z600
Memory ex works 4GB
Maximum memory 192GB / 48GB according to manufacturer
Memory Slots 6
Note
RDIMM and ECC UDIMM dürfen nicht gemischt im server verwendet werden. RDIMM Computer memory werden ab der Board Revision C2 supports. Bios Setup - System Information Menu - Boot Block Date 1/30/09=B3 version (ECC UDIMM) - Boot Block Date 01/07/10=C2 Revision (ECC UDIMM and RDIMM)

Order info

Item number SP332975
Brand
EAN 4063369959019
Condition New
Memory warranty 5 years warranty
Compatibility 100% compatible with HP Z600
Money-back guarantee Yes, 100%
Indicated delivery times apply to shipping within Germany. The delivery times for shipping abroad as well as further information on delivery times can be found here.
The product photos do not necessarily reflect the actual appearance of the memory modules. This is due to layout changes of the memory modules or other circumstances beyond our control.
Data sheet "8GB Computer memory DDR3 for HP Z600 RAM UDIMM ECC"

FAQ - Frequently asked questions about HP Z600

Which capacity does the factory installed memory of the HP Z600 have?
The Z600 is supplied with 4GB RAM.
What is the maximum memory capacity of my HP Z600?
The maximum memory size of the Z600 is 192GB / 48GB according to manufacturer.
The phs memory® option for my HP Z600 is faster than the existing RAM - Is this a problem?
If your system is limited to a slower memory speed, the "Fallback Speed Setting" in the SPD of the phs memory® RAM-Modules ensures the support of slower memory settings down to the given memory speed.
Will the legal warranty of the device expire, if I install a new memory module?
The legal warranty right of your Z600 will not be affected if you install the memory yourself.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Information on the authenticity of customer reviews: Reviews are not checked for authenticity before publication. They may therefore also come from consumers who have not purchased/used the reviewed products.